Oscillating Multi Tool (2003540) In Stock Now

About:

Its versatility lets you accomplish numerous tasks that would be impossible with other tools. You can sand; saw metal, wood, and drywall; make large holes; plunge cut into hardwood; or undercut a doorway. You can also remove grout, cut trim for new flooring, and cut off nails and screws flush

Some more uses:

• Making old nails and screws flush.

• Hanging doors.

• Fitting baseboards.

• Laying flooring.

• Creating socket recesses.

• Forming basin spaces.

• Cutting pipes.

• Removing rust.

• Polishing.

• Eliminating old and tired grout.

• Removing aged adhesive.

• Chipping mortar.

This Unit:

DeWalt Type 2
Manual and case with parts and sandpaper included.

Operation:

Five Types of Blades for Oscillating Tools

There are various blades available, each with its specialty. To use your oscillating tools efficiently, you must be familiar with some essential blades:

1. Sawing blade

You should use the right sawing blade when cutting into materials; otherwise, your blade could become dull, costing you frequent replacements. For cutting metals, it is recommended to use a bi-metal saw since they have a carbon blade and a flexible body, preventing them from snapping during the process.

Similarly, for wood, a high carbon steel (HCS) blade is required due to its flexibility, allowing the blade to cut into softer materials easily.

2. Scraping blade

As the name suggests, scraping blades are excellent at scraping. They are ideal for removing silicone, paint, adhesives and other coatings. Just like saw blades, scraping blades come in different shapes and sizes. The harder blades scrap tough coatings such as vinyl, varnish and paint layers. On the other hand, flexible scraping blades are great for removing glue and calk.

3. Sanding and polishing blade

Sanding blades are handy when it comes to sanding and polishing surfaces. These blades are available in a wide variety, and your choice is determined by the surface you need to polish. Surfaces like masonry, stone and cement require diamond polishing pads since they leave the surface with a shiny, glossy finish.

4. Grout removal

Grout removal blades are semi-round blades that work best for removing grout effortlessly. Getting a carbide-segmented blade is recommended to ensure that your tiles aren’t chipped off while you work on removing that grout. These blades also work exceptionally well on plaster, concrete and tile surfaces.

5. Rasping blade

For drinking and sanding hard materials, rasping blades are highly recommended. These blades have vast carbide chunks, making them durable against the most rigid materials. Rasping blades can be used when working with stone, concrete, plaster, wood and other tough exteriors which won’t chip as easily.

Safety:

• Wear a dust mask, gloves, and goggles.

• Ensure the ventilation slits are clean and free from dust.

• Disconnect the battery or unplug when exchanging accessory heads.

• Check the tool attachment is secure before commencing use.

• Don’t touch a recently used blade or saw with your fingers — it will be hot.

• Where possible, operate the multitool with two hands.

• Set the correct speed to suit your target material.

• Never use damaged or bent tool accessories.

Loan Notes: