| Location | St. Paul |
| Location Code | E - Plumbing |
Hand-Driven Hole Punch Set with 15 Punches and Material Removal Tool For Use On Cork, Rubber Turn the handle of these punches while pushing down to punch holes
in cork and rubber. Do not hammer them.
This set includes 15 sizes hand-driven hole punches plus a tool to remove punched
out material. Turn the handle of these punches while pushing down to punch holes
in cork and rubber. Also known as cork borers, these tools have precision-ground edges
that can be sharpened.
Hole Dia. outside dimension
For Use On Cork, Rubber
15 Punches, Material Removal Tool set Numbered
0.18", 0.25", 0.32", 0.38", 0.44", 0.50" 0.56", 0.61", 0.65", 0.70", 0.75", 0.79", 0.84", 0.88", 0.94"
------
This set also includes punch (inside the white bag) that can cut holes into leather, cork, and rubber by gentling hammering it. The set includes both a cutting side and a flat side. Position the beveled/cutting site into the desired materials, gently hammer the flatter circle end to punch the desired hole. Hole measurements are as followed:
3/4", 0.67 inch (2/3"?), and 1/2"
https://www.mntoollibrary.org
St. Paul
1010 Dale Street NSaint Paul, MN, 55117
USA
651-383-7082