| Location | Northeast Minneapolis (NEMTL) |
| Manufacturer | Skil |
| Model | Xtra-tool Model 600 |
About:
The drill is arguably one of the key tools for any D.I.Y. project, with a whole range of applications. Its key tasks include drilling holes and screwing screws in and out of surfaces, but this versatility means it can be used for tasks big and small, including hanging curtains, attaching shelves or hanging pictures, through to building furniture or installing a deck.
This Unit:
1/2" Hammer drill, Skil Xtra-tool Model 600
Hammer mode for drilling holes in masonry and concrete (5/8 in. concrete capacity)
Drill mode for drilling holes in wood, plastic and metal (1/2 in. steel capacity)
Heavy duty, keyed chuck for solid bit retention
Chuck key storage lanyard reduces the occurrence of lost chuck keys
Auxiliary handle improves handling and balance of tool during use
Depth stop rod for consistent, accurate holes
Variable-speed dial for matching speed to the application
Lock-on trigger button for continuous use
6 ft. cord
Types of drills
Which drill you need to use will depend on what you’re drilling into. There are three common drill types:
Operation:
Power up your drill. ...
Adjust the torque to suit the material you're drilling. ...
Find the Xs or dots you made to mark where to drill.
Get at the correct level to drill the hole. ...
Stabilize your drill vertically. ...
Gently pull the trigger. ...
Once you've drilled as far as you need, put the drill in reverse.
Safety:
Wear safety glasses or a face shield (with safety glasses or goggles).
Keep drill air vents clear to maintain adequate ventilation.
Keep drill bits sharp always.
Keep all cords clear of the cutting area during use.
Loan Notes: