Right Angle Drill (20020070) In Stock Now

About:

The drill is arguably one of the key tools for any D.I.Y. project, with a whole range of applications. Its key tasks include drilling holes and screwing screws in and out of surfaces, but this versatility means it can be used for tasks big and small, including hanging curtains, attaching shelves or hanging pictures, through to building furniture or installing a deck.

This Unit:

The right angle drill is pretty versatile and can be useful in nearly any DIY project that gets you into tight spaces, such as plumbing and other construction projects. For example, when drilling or screwing between floor joists, inside a cabinet, or anywhere the screws may be hard to reach with a typical drill.

Types of drills

Which drill you need to use will depend on what you’re drilling into. There are three common drill types:

drill driver

hammer drill

impact drill

Operation:

• Power up your drill. ...

• Adjust the torque to suit the material you're drilling. ...

• Find the Xs or dots you made to mark where to drill.

• Get at the correct level to drill the hole. ...

• Stabilize your drill vertically. ...

• Gently pull the trigger. ...

• Once you've drilled as far as you need, put the drill in reverse.

Safety:

• Wear safety glasses or a face shield (with safety glasses or goggles).

• Keep drill air vents clear to maintain adequate ventilation.

• Keep drill bits sharp always.

• Keep all cords clear of the cutting area during use.

Loan Notes: