Floor Orbiter - 13" (2001990) In Stock Now

ABOUT:​

Strip, scrub, wax, and polish all floor surfaces, as well as deep clean your carpets. The Oreck Orbiter brush head rotates in a random orbit for easy-to-use fingertip control. With several different pads and brushes available, you can use this commercial grade multi-purpose floor tool to: 

• Remove grout stains on tile floors.
• Bring back the luster in hardwood floors.
• Remove oil and grease from concrete and asphalt.
• Restore marble floors, bringing them back a shine.
• Deep clean carpets, removing dirt and stains.

THIS UNIT:
Grey with Blue Handles.
Assorted buffing pads and sanding screens/pads in various grits are available at the branch for purchase. Please see the complete list and description of the available accessories on page 10 of the manual.

OPERATION:
Attaching Accessories To attach a pad, bonnet, or sand screen:
1. Lay the machine on its back with the handle lying on the floor. 2. Attach the pad or bonnet to the black drive pad holder using the teeth of the black drive pad holder. If attaching a sand screen, first attach the pad to the black drive pad holder. Then place the sand screen on the floor-side of the pad. 3. Place the black drive pad holder on the beige holder pan. To attach a brush: With the bristles pointed away from the unit, place the brush on the beige holder pan.
CAUTION: NEVER put the brush or black drive pad holder on the machine by placing it on the floor and moving the running machine over it, or by placing the machine over the brush or black drive pad holder and then starting the motor.

The on-off switch is located on the handle. On (I) - Off(O) is printed on the switch. BE CAREFUL that the switch is in the OFF (O) position before you plug-in the electrical cord. Before turning the machine on, be sure there is a bonnet pad or brush in place on the machine.

Grasp the handle and glide the machine across the floor in a side to side motion.

SAFETY:
Always wear closed toe shoes!

LOAN NOTES: