Lathe - SHOP USE ONLY (2000739) SHOP USE ONLY

GENERAL DIMENSIONS

■ Spindle Height: 44½”

■ Power Input: 110V, Single Phase ■ Length x Width: 47 x 23½”

■ Bench Height: 30”

■ Weight: Approximately 300 lbs.

12½” swing over the bed (9” swing over Banjo) 24” between centers

11” Stainless Steel Toolrest with 1” Post

2 step pulley (0 - 2000 / 0 - 4000 rpm)

Two position Control Box

Spindle is hardened and ground

Spindle Thread: 1” - 8tpi RH (inboard

¾” - 16tpi RH (outboard)

7/16” thru hole (in spindle)

24 position indexing

#2 Morse Taper in headstock & tailstock

Forward & Reverse with two pre-programmed accel / decel settings

110V input, 1HP AC variable speed inverter (drive) with dynamic braking (220V also available)

1HP Marathon Motor

High Performance Powder Paint on Stand & Lathe Cast Iron Tailstock with Acme thread & 3” quill travel Patented clamping mechanism in Banjo

Offset Bed for easy clean up