| Location | St. Paul |
| Location Code | L3 |
| Manufacturer | Kreg |
These brackets serve as an extra pair of hands when mounting a drawer to full extension slides.
Suitable for both face frame and frameless construction, you simply clamp a bracket at the front of the cabinet under each slide, set the drawer on the brackets, and extend the slides slightly. Once each slide is attached with a single screw, you can pull the drawer out to fasten the remaining screws while maintaining the correct slide position for smooth operation.
The brackets leave 1/4" clearance between the bottom edge of the drawer and the frame or carcass.
Though developed as a complement to the Kreg drawer slide mounting tool, the brackets can be used any time you are installing full extension slides.
Made in USA from high-impact polystyrene, they come as a pair of left and right and save both time and temper.