| Location | St. Paul |
| Location Code | H Auto |
| Manufacturer | Pittsburgh |
| Model | 93980 |
A puller is a tool used to remove parts such as bearings, pulleys or gears from a shaft. They have legs, typically two or three which circle around the back or inside of a part and they also have a forcing screw which centers up against the end of a shaft.
A puller is a tool used to remove parts such as bearings, pulleys or gears from a shaft. They have legs, typically two or three which circle around the back or inside of a part and they also have a forcing screw which centers up against the end of a shaft.
Featuring drop-forged construction, the bearing separator and puller set comes with two of the most widely used 2 in. and 3 in. bearing splitters, along with pulling components to safely remove bearings. The set also includes a bar-type puller head with a 9/16 in. forcing screw.
- Four sets of hex push-puller legs
- 2 in. and 3 in. bearing splitters
- 4 in. and 5 in. extension legs
- 6 in. yoke with center adapter
- Bar-type puller head with 9/16 in. forcing screw
- Rugged drop-forged construction
Manual Included
Minnesota Tool Library
https://www.mntoollibrary.org
https://www.mntoollibrary.org
St. Paul
1010 Dale Street NSaint Paul, MN, 55117
USA
651-383-7082