Pipe Expander (2000562) In Stock Now

Exhaust pipe expander. 1-1/2" to 2-1/2".

For expanding exhaust pipes to fit, or removing dents or grooves.

OPERATION

Holding tool by handgrip [knurled part near nut], insert it into pipe. If pipe is less than 2" diameter, the small end is used. On  pipes 2" and over, push right on in until the large segments will contact. Expand by turning head nut with wrench. Tool will  expand smoothly and easily and will round up pipes end quickly. The tool does not turn in the pipe.

To remove clamp groove in pipe: Be sure tool is in pipe at position of clamp groove. Also be sure the "O" ring groove is not located at the clamp groove. Expand as above.

SAFETY

Use eye protection