| Location | St. Paul |
| Location Code | H |
| Manufacturer | SPX |
| Model | 7249 |
A ball joint press is used to remove the ball joints from a control arm that was pressed in from the manufacturer. Most aftermarket ball joints are bolt-on designs that replace the pressed-in ball joint. There are some aftermarket ball joints that are similar to the original manufactured equipment that is pressed in.
Minnesota Tool Library
https://www.mntoollibrary.org
https://www.mntoollibrary.org
St. Paul
1010 Dale Street NSaint Paul, MN, 55117
USA
651-383-7082