Power Drill - 1/2" (2002257) Due 5/22/2024

About:

The drill is arguably one of the key tools for any D.I.Y. project, with a whole range of applications. Its key tasks include drilling holes and screwing screws in and out of surfaces, but this versatility means it can be used for tasks big and small, including hanging curtains, attaching shelves or hanging pictures, through to building furniture or installing a deck.

This Unit:

Miller Falls 1/2" keyed chuck drill. Single speed reversing. 450 rpm. 120 Vac.

Bare tool. With side handle. Chuck key on power cord.

Side handle fits in 4 positions.

Reverse switch is on left side.

Types of drills

Which drill you need to use will depend on what you’re drilling into. There are three common drill types:

drill driver

hammer drill

impact drill

Operation:

• Power up your drill. ...

• Adjust the torque to suit the material you're drilling. ...

• Find the Xs or dots you made to mark where to drill.

• Get at the correct level to drill the hole. ...

• Stabilize your drill vertically. ...

• Gently pull the trigger. ...

• Once you've drilled as far as you need, put the drill in reverse.

Safety:

• Wear safety glasses or a face shield (with safety glasses or goggles).

• Keep drill air vents clear to maintain adequate ventilation.

• Keep drill bits sharp always.

• Keep all cords clear of the cutting area during use.

Loan Notes: